The Cyber Series projector screens use a US manufactured high quality multi ply material with a high contrast and low gain of 1.1. The Projector screen material is tear resistant, fireproof, wrinkle proof and is designed to hang perfectly flat. The centre layer is a glass fibre net producing a flex rate of less than 1% compared with the industry average of 33%. The front layer optimises contrast and reflectivity while a black PVC backing prevents light leakage and helps retain a uniformly flat projection surface.
Built in Infra-Red Remote Control and Projector Trigger
All Cyber electric projector screens feature built in infra-red remote control and come with a simple hand held remote. The IR receiver is located on the front of the curved case but should the screen be installed behind a pelmet or recessed into the ceiling, a small external IR eye is included.
Also included is a 12volt trigger input, this allows the screen to be activated from any projector or surround sound amp with a 12volt output. A 10m mono mini jack cable is included to connect the screen to a 12volt output device.
Case and Motor Design
The aluminium diamond white case has an elegant curved profile making it one of the nicest looking screens on the market. The rigid sturdy design keeps the internal roller perfectly straight and any motor noise to a minimum. The Cyber series projector screens all use SOMFY motors, the same motors found in the likes of Dalite and Stuart cinema screens.
Cyber projection screens feature one of the best mounting systems on the market. Two small brackets fit to the wall or ceiling anywhere along the length of the case. Once the screen is clipped into the brackets an aluminium lever secures it in position.
The screen can only be lifted off the brackets when the lever if pressed in.
Other features and measurements
Just like televisions, projector screens are measured in imperial feet and inches.
The screen is measured by the width of the material from left to right. The standard sizes are 6ft, 7ft, 8ft and 9ft. The viewable area is the white part of the screen which is slightly smaller due to the surrounding black borders. The Cyber screens top black border can be adjusted from 0 to 20″/50cm to give the desired screen position.
All screens are 16×9 aspect ratio in line with the majority of TV broadcasts and most projectors. They come with Infra red control (with remote unit included), 12V trigger (to plug into the 12V trigger output from your projector) for automatic operation,
6ft wide (67″ x 38″) – (1700 x 970mm) viewing area (Diagonal 77″) Case Size 1950 x 100 x 90mm 6ft-Cyber-Electric-projector-screen
7ft wide (80″ x 45 “) – (2030 x 1140mm) viewing area (Diagonal 92”) Case Size 2275 x 100 x 90mm 7ft-Cyber-Electric-projector-screen
8ft wide (92″ x 52 “) – (2304 x 1320mm) viewing area (Diagonal 106”) Case Size 2585 x 105 x 90mm 8ft-Cyber-Electric-projector-screen
9ft wide (105″ x 59 “) – (2670 x 1500mm) viewing area (Diagonal 120”) Case Size 2904 x 105 x 90mm 9ft-Cyber-Electric-projector-screen
10ft wide (120″ x 68″) – (3050 x 1730mm) viewing area (Diagonal 138″) Case Size 3353 x 145 x 137mm 10ft-Cyber-Electric-projector-screen